The 8-Port Gigabit Long Range PoE+ Switch, model TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP phones, and IP cameras. It supports both PoE and PoE+ devices with a 65W PoE power budget. Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for reliable high-speed PoE networking. Its fanless design is perfect for quiet environments that require silent operation.
Features:
- Easy installation
- 8 x Gigabit PoE+ ports
- Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps
- DIP switch supports VLAN port isolation and QoS
- 16Gbps switching capacity
- 65W PoE budget
- Wall mountable design
- Sturdy metal switch
- Use with TRENDnet’s PoE splitter to network and power non-PoE devices
- NDAA / TAA compliant (U.S. and Canada only)
Specifications:
| Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3x
- IEEE 802.3p
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3az
|
|---|
| Device Interface | - 8 x Gigabit PoE+ ports
- LED indicators
- DIP switch
|
|---|
| Data Transfer Rate | - Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit Ethernet: 2000Mbps (full duplex)
|
|---|
| Performance | - Switch Fabric: 16Gbps
- RAM Buffer: 192KB
- MAC Address Table: 4K entries
- Jumbo Frames: 9KB
- Forwarding rate: 11.9Mpps (64-byte packet size)
|
|---|
| Special Features | - Long range PoE+ up to 200m at 10Mbps
- VLAN port isolation
- 802.1p Class of Service (CoS)
- Wall mountable
|
|---|
| DIP Switch | | Switch | Status | Function | | 1 | OFF | Ports 1 & 2: Default gigabit PoE+ | | ON | Ports 1 & 2: Long range PoE+ up to 200m at 10Mbps | | 2 | OFF | Ports 3 & 4: Default gigabit PoE+ | | ON | Ports 3 & 4: Long range PoE+ up to 200m at 10Mbps | | 3 | OFF | VLAN port isolation disabled | | ON | VLAN port isolation on ports 1-4 | | 4 | OFF | QoS disabled | | ON | QoS Enabled: Video & Voice – High Priority | | 5 | OFF | Port 5: Default gigabit PoE+ | | ON | Port 5: Long range PoE+ up to 200m at 10Mbps | | 6 | OFF | Port 6: Default gigabit PoE+ | | ON | Port 6: Long range PoE+ up to 200m at 10Mbps | | 7 | OFF | Port 7: Default gigabit PoE+ | | ON | Port 7: Long range PoE+ up to 200m at 10Mbps | | 8 | OFF | VLAN port isolation disabled | | ON | VLAN port isolation on ports 5-7 |
*DIP Switch 3 & 8 cannot be enabled at the same time |
|---|
| Power | - Input: 100 – 240 V AC, 50/60Hz, 2.5A
- Output: 55V DC, 1.3A external power adapter
- Max. consumption: 70.6W
|
|---|
| PoE | - PoE budget: 65 Watts
- PoE Mode A: Pins 1,2 for power and pins 3,6 for power
|
|---|
| Operating Temperature | - 0° – 40 °C (32° – 104 °F)
|
|---|
| Operating Humidity | |
|---|
| Dimensions | - 240 x 105 x 27mm (9.45 x 4.13 x 1.1 in.)
|
|---|
| Weight | |
|---|
| Certifications | |
|---|
| |
|---|
PACKAGE CONTENTS |
- TPE-LG80
- Quick Installation Guide
- Power brick (55V DC, 1.3A)
- Power cord (1.8m/6 ft.)
|
