Feature Bullets
- Convert an IDE/ATAPI drive into Serial ATA interface just like a SATA drive. It converts any kind of IDE devices to work with SATA I, SATAII or SATA III Host Controller. Ideal for keeping existing IDE/ATAPI devices for newer systems with Serial ATA interface.
- Mini vertical board with size only 2.2″ (L) x 0.9″ (W) and mount directly to the back of IDE hard drive or ATAPI devices.
- Supports and attaches any type of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ….)
- Complete hardware solution; no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support Serial ATA storage devices
- Fully RoHS compliant. Made in Taiwan.
Product Description
The Ableconn SAT-IDE40 allows you to install an existing IDE drive to the newer SATA host controller. It’s the easiest and cost effective solution to keep existing IDE/ATAPI devices to work with newer motherboards or systems without legacy IDE interface.
Features
- Connector:
- 1 x IDE (40-pin, PATA) Female (direct attach to IDE drive)
- 1 x SATA (7-pin, Data) (to be connected with a SATA cable to motherboard)
- 1 x SP4 (4-pin; small drive power) Male
- Chipset: Silicon Image SiI3811
- Data transfer rate:
- Up to 133MBps
- Software:
- OS independent; No driver installation required
- Support Windows, Macs, and Linux
- Supports and attaches any type of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ….)
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Mini vertical Board
- Compliant with Serial ATA 1.0a specifications
- SATA transfer rate 1.5Gbps
- Supports Spread Spectrum in receiver
- Compliant with ATA specifications
- Compatible with Ultra ATA 133
- Automatically decode the ATAPI command to know the UDMA direction.
- Bootable. Plug and Play and Hot swappable. The device can be removed and added without system shutdown or reboot.
- Fully RoHS compliant
- Made in Taiwan
Package Contents
- Ableconn SAT-IDE40 IDE Device to SATA Adapter
- 1 x Y Power Cable (LP4 Molex to LP4 +SP4)
