Feature Bullets
- Install a Compact Flash reader to the back of computer system using a SATA port.
- Support Bootable & Hot-Plug Compact Flash Type I / Type II or IBM Microdrive
- Support any size of CF memory module up to 2TB
- OS independent; No driver installation required. Native support in Windows, Mac and Linux.
- Fully RoHS compliant. Made in Taiwan.
Product Description
The Ableconn ISAT123CF let you easily install a CF reader to the back of computer system using a SATA port.
Specification
- Connector:
- 1 x CF receptale socket
- 1 x SATA (7-pin, Data) (to be connected with a SATA cable to motherboard)
- 1 x SP4 (4-pin; small drive power) Male
- Chipset: Marvell 88SA8052
- Data transfer rate:
- Up to 3 Gbps (SATA II)
- Supported Media:
- Type I / Type II CF or IBM Microdrive
- Software:
- OS independent; No driver installation required
- Support Windows, Macs, and Linux
- Compliant with Serial ATA 2.6 specifications and High transfer rate of 1.5 and 3 Gbps
- The CF card can be the primary bootable device containing the OS and application
- On board activity LED for CF access
- CF Push bottom ejector on board
- CF and PCBA Powered by 4-Pin floppy power connector
- CF 3.3V / 5V Voltage selection
- ATA/ATAPI PIO mode data transfer
- ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
- ATA/ATAPI-7 Streaming feature set
- ATA/ATAPI 48-bit address feature set
- SATA hot-plug
- Low Profile PCIe Form Factor; Regular size PCIe bracket on board and an additional Low Profile bracket included
- Power Consumption: 5V / 170mA
- Operating temperature range: 0 – 55 ºC
- Fully RoHS compliant
- Made in Taiwan
Package Contents
- Ableconn ISAT123CF CF to SATA Brodge Board with PCIe bracket
- 1 x Y Power Cable (LP4 Molex to LP4 +SP4)
- 1x Low profile bracket