Extend the reach of PoE links to up to 100m
Extend the reach of PoE links up to 100m, to powered devices (PD), over long distances; Up to 4 extenders can be cascaded to extend the range of a PoE source device (PSE) up to an additional 400m, for a total range of 500m from the source PSE source to the destination device.

Using Cat 5e (or higher) Ethernet cabling, it supports IEEE 802.3af (PoE / Type 1), IEEE 802.3at (PoE + / Type 2), and IEEE 802.3bt (PoE ++ / Type 3) standards, for compatibility with PD devices such as pan / tilt zoom cameras, lights, sensors, and Wi-Fi access points.

Designed for environments under extreme conditions
This PoE extender includes an IP-30 box and 500,000+ hour MTBF (Telcordia / Bellcore) at 50C, for long-term reliability and durability. The operating temperature range between -40C to 75C allows its use in a wide range of applications, both indoors and outdoors, where the temperature is not under control.

Conforms to various standards on resistance to vibrations, impacts and free falls:

Vibrations: EN 60068-2-6
Impacts: EN 60068-2-27
Free falls: EN 60068-2-32
The PoE extender also includes hardware for wall or DIN rail mounting.

Flexibility of nominal power options (outputs)
It supports inputs of up to 95W from a PSE source and can provide 15W, 30W or 60W of nominal power to a target PD device. Low power consumption of 2.7W provides more power for devices, especially when using multiple extenders for a single extension.

It includes protection against electromagnetic discharge (ES), fast electrical pulses (EFT) and electrical discharge, according to the following standards:

Electromagnetic Discharges (ESD): IEC 61000-4-2: Contact: 6KV; Air: 8KV
EFT: IEC 61000-4-4: Power: 2KV; Signal: 2KV
Electric shocks: IEC 61000-4-5: Power supply: 2KV; Signal: 2KV.