This switch is a next generation rack mountable hardened switch with 80Gbps switching capacity. It provides (16) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports and has (2) additional 1G/10G SFP+ slots.
Features
- IPv4/IPv6 dual protocols
- Supports Jumbo Frame up to 9K bytes
- Authentication – RADIUS, TACACS+
- DHCP Relay, DHCP Snooping, DHCP Server
- L2/L3/L4 ACLs Support MAC, VLAN ID, or IP address, protocol, per port
- LLDP (Link Layer Discovery Protocol)
- ITU-T G.8031 Ethernet Linear Protection
- ITU-T G.8032 Ethernet Ring Protection Switching
- Rapid Ring for fast recovery
- IEC 62439-2 Media Redundancy Protocol (MRP)
- IEEE 802.3az Energy Efficiency
- IP Source Guard, Port Security
- Port Mirroring
- Syslog
- Static Routing, 130 rates (max)
- Fanless Design
- Media Redundancy Protocol (MRP)
PoE Features
- Compliant with IEEE 802.3at PoE+
- Compliant with IEEE 802.3af PoE
- IEEE 802.1AB LLDP-MED Configuration
- PoE Configuration
- PoE Scheduling
- Power Delay
- Auto Power Reset
- DHCP per Port
- Always on PoE
Software Features
- Management: Web Management, SNMP V1/V2c/V3, SSH, CLI
- Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP) and static trunk
- Multicast: Support IGMP Snooping V1/V2/V3, MVR, MLD Snooping V1/V2
- Quality of Service: Supports 8 hardware queues. Strict priority and WRR, Ingress policer, Egress shaping and per port rate control
- Spanning Tree: Supports IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
- VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, Q-in-Q, MAC-based VLAN, Management VLAN, Voice VLAN, Private VLAN
- Firmware Update through TFTP and HTTP/HTTPs
- E-Line, E-LAN, E-TREE, E-ACCESS, IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731, Y.1564
- Support IEEE 1588 v2 PTP (TC)
Device Management System (DMS)
- Graphical Monitoring – Topology view, Floor view, Map view
- Traffic Monitoring
- Troubleshooting – Network Diagnostic, protection mechanism, performance and link management
SISPM1040-3166-L Tech Specs
Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3z
- IEEE 802.3ae
- IEEE 802.3x
- IEEE 802.3ad
- IEEE 802.1D
- IEEE 802.1w
- IEEE 802.1s
- IEEE 802.1Q
- IEEE 802.3p
- IEEE 802.1ad
- IEEE 802.1AB
- IEEE 802.3af
- IEEE 802.3at
- IEEE 802.3az
- IEEE 802.3ah
- IEEE 802.1ag
- IEC 62439-2
Protocols
- CSMA/CD
Technology
- Store-and-forward switching architecture
Connectors
- (16) 10/100/1000 Mbps RJ-45 ports
- (4) 100/1000 Mbps SFP slots
- (2) 1G/10G SFP+ slots
- (1) Console RJ-45 port
MAC Address
- 32K MAC address table
Backplane
- 80 Gbps
Digital Output
- 24 VDC / 1A (Relay)
Digital Input
- Level 0 (low): 0V to 6V
- Level 1 (high): 10V to 24V
Dimensions
- Width: 17.4” [442 mm]
- Depth: 11.81” [300 mm]
- Height: 1.73” [44 mm]
Power Input
- 52 – 57VDC Dual Input Terminal Block or Single Input 100 – 250VAC
- Maximum Power Consumption (without PoE): 36 Watts
Power-over-Ethernet
- Max PoE Budget 250 Watts (PoE power not available with use of AC power supply)
- 15 Watts for (16) ports simultaneously
- 30 Watts for (8) ports simultaneously
Ingress Protection
- IP30
Environment
- Operating: -40°C to +75°C (1G SFPs)
- Operating: -40°C to +60°C (10G SFPs)
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 10.58 lbs. [4.8 kg]
Certifications
- FCC Class A; CE; NEMA TS-2, UL
- Safety: LVD
Compliant*
(Designed to Meet) *Please contact sales with certification needs
- IEC61850-3, IEEE 1613, Class 1 Div 2
