The E-100BTX-FX-06 is a stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential.
Features
- Used in pairs or as a single unit to integrate fiber into a 100base copper environment
- Low latency, layer 1 design
- Auto-negotiation
- Auto-MDI/MDIX
- Active link pass through
- Far-End-Fault (FEF)
- Pause
- Automatic link restoration
- Supports all 100Mbps SFP Modules
E-100BTX Series Tech Specs
Standards
- IEEE 802.3
- 100Base-FX
- 100Base-TX
Switches
- SW1: Auto-Negotiation On/Off
- SW2: Pause TX On/Off
- SW3: Active Link Pass Through On/Off
- SW4: Far-End-Fault (FEF) On/Off
Status LEDs
- PWR (Power)
- SDF or LKF (Link Fiber)
- SDC or LKC (Link Copper)
- RXF (Receive Fiber)
- RXC (Receive Copper)
Dimensions
- Width: 3″ [76 mm]
- Depth: 4.7” [119 mm]
- Height: 1″ [25 mm]
Power Supply
- External AC/DC required:120-240VAC input, 12VDC Output; unregulated, standard
Power Input
- 9-14VDC
Power Consumption
- 1.75 Watts
Environment
- Operating: 0°C to 50°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 2 lbs. [0.90 kg]
MTBF
- Greater than 46,768 hours (MIL‐HDBK‐217F)
- Greater than 123,861 hours (Bellcore7 V5.0)
Certifications
- Regulatory: FCC Class A, EN55024, EN55022 Class A, EN61000, CE Mark
