The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential.
Features
- Extended Temperature Capable: Designed to operate in environments where ambient temperatures can rise as high as 65°C (149°F)
- Auto-Negotiation
- Auto-MDI/MDIX
- Link Pass Through
- Far-End-Fault Detection
- Automatic Link Restoration
- Pause
E-100BTX-HT Series Tech Specs
Standards
- IEEE 802.3
Data Rate
- 100 Mbps
Switch
- SW1: Auto-Negotiation On/Off
- SW2: Pause TX On/Off
- SW3: LPT On/Off
- SW4: FEF On/Off
Jumper
- Jumper Block 1: Auto-MDI/MDIX enable
Status LEDs
- PWR (Power): Lit for normal operation
- SDF (Signal Detect Fiber): Lit for fiber link
- SDC (Signal Detect Copper): Lit for copper link
- RXF (Receive Fiber): Flashing = RX data
- RXC (Receive Copper): Flashing = RX data
Dimensions
- Width: 3″ [76 mm]
- Depth: 4.7” [119 mm]
- Height: 1″ [25 mm]
Power Supply
- External AC/DC required; Output: 9 VDC. 1.0A;
- 120-240VAC input, unregulated; standard
Environment
- Operating: -25°C to 65°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 2 lbs. [0.90 kg]
MTBF
- Greater than 46,768 hours (MIL-HDBK-217F)
- Greater than 123,861 hours (Bellcore7 V5.0)
Certifications
- Safety: Wall Mount Power Supply: UL Listed, cUL Listed (Canada)
- FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
