Lantronix C6010 Series { Best Price In India } – Dealer

Lantronix C6010 Series-ION T1/E1 Network Interface Device Module T1/E1 over Fiber

Contact us on team@bvmindia.in and Call: +91-9205161813

Category:

The ION C6010 is a managed media converter that offers a solution for extending T1/E1 or PRI connections over fiber optic cabling. It provides fiber extension though a twisted pair RJ-48 port and a fiber port. These T1/E1 converters must be used in pairs, one on each end of the fiber link. Typical installations include a chassis card installed in a centrally located managed ION chassis, linked over fiber to a S6010 stand-alone converter at the remote location. The T1/E1 converters are available with fixed fiber connectors or an open SFP slot, with support for various fiber types, distances, and wavelengths to provide maximum flexibility for any network topology. CWDM SFPs can also be used to further increase the bandwidth capacity of the fiber infrastructure.

Features

  • Remote in-band management
  • Local or Remote Loopbacks – Copper or Fiber
  • Switch selectable for T1 or E1
  • Remote firmware upgrade
  • LEDs for immediate visual status
  • Supports dual or single fiber
  • Supports multimode and single mode fiber at a variety of distances
  • Supports CWDM SFPs
  • SNMP management when used with ION chassis and management module
  • Remote stand-alone can be managed by local peer
  • Extend PRI over fiber
  • Must be used in pairs

 

 

C6010 Series Tech Specs

Standards

  • ANSI T1.102
  • T1.402
  • T1.408
  • ITU I.431
  • G.703
  • G.736
  • G.775
  • G.823
  • ETSI 300-166
  • ETSI 300-233
  • TBR12/12

Connectors

  • Copper Connectors RJ-48, BNC
  • Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
  • SFP Fixed Optics: ST or SC connector

Data Rate

  • T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s

Status LEDs

  • Power, Signal Detect Copper, Signal Detect FiberK

Dimensions

  • Width: 0.86” [22 mm]
  • Depth: 6.5” [165 mm]
  • Height: 3.4” [86 mm]

Power Consumption

  • 2.6 Watts

Environment

  • Environment specs are dependent on the chassis chosen
  • Operating: 0°C to 50°C
  • Humidity: 5% to 95% (non-condensing)
  • Altitude: 0 – 10,000 ft.

Weight

  • 1 lb. [0.45 kg]

MTBF

  • Greater than 250,000 hours (MIL-HDBD-217F)
  • Greater than 687,000 hours (Bellcore)

Certifications

  • CISPR/EN55022 Class A, FCC Class A, CE Mark
Scroll to Top