Lantronix C4110-4848 { Best Price In India } – Dealer

Lantronix C4110-4848-ION Fiber to Fiber Media Converter Module SFP+ to SFP+ for Data Rates from 1 Gbps to 11.5 Gbps

Contact us on and Call: +91-9205161813



The C4110 is a fiber to fiber media converter module. It is protocol independent and supports data rates from 1Gbps to 11.5Gbps through two open SFP+ ports. This allows network managers to customize the C4110 with a pair of SFP+ modules to meet their network requirements. The open SFP+ port supports a wide variety of Lantronix 10Gbps SFP+ fiber modules. This any-rate to same-rate converter can be used to perform reliable and cost-effective single mode to multimode conversion or it can be used to provide wavelength conversion in CWDM applications. The ION C4110 is a manageable device when installed in a managed ION chassis.


  • Fiber to fiber repeater
  • Remotely Managed when installed in a Managed ION Chassis
  • Supports data rates from 1Gbps to 11.5Gbps
  • Support Any-rate to Same-rate
  • Protocol Transparent supports:
    • Ethernet: 10Gig LAN, 10Gig Wan, 1Gig LAN
    • Fiber Channel: 10, 8, 4, 2, 1Gig
    • SONET/SDN OC-192, OC-48
  • SFP to SFP or SFP+ to SFP+
  • Provides conversion between different types of fiber
  • Supported transmission distance based on the SFP modules and type of fiber used
  • Supports 3R (Reamplify, Reshape, and Retime) signal regeneration
  • No frame size limitations
  • Use as a fiber mode converter
  • Use as a specific wavelength CWDM Transponder
  • Also available as a stand-alone converter: S4110-4848



C4110-4848 Tech Specs


  • IEEE 802.3ae
  • ITU.G.709
  • SFF8431
  • Multi-sourcing Agreement (MSA)
  • Small Form Factor Pluggable (SFP)


  • PWR On = Power
  • Port 1 Link/Act: On = Link, Flashing = Network Traffic
  • Port 2 Link/Act: On = Link, Flashing = Network Traffic

Data Rate

  • Protocol Independent, 1 Gbps to 11.5 Gbps

Dip Switch

  • Only 4 of the 8 Dip Switches are used to select the operational data rate, see the user guide for the supported dip switch configurations


  • Width: 0.86” [22 mm]
  • Depth: 6.5” [165 mm]
  • Height: 3.4” [86 mm]

Power Consumption

  • 4.2 Watts


  • Environment specs are dependent on the chassis chosen
  • Operating: 0°C to 50°C
  • Humidity: 5% to 95% (non-condensing)
  • Altitude: 0 – 10,000 ft.


  • 1 lb. [0.45 kg]


  • Greater than 250,000 hours (MIL-HDBK-217F)
  • Greater than 687,000 hours (Bellcore)


  • FCC Class A, CE Mark, EN55022 Class A, EN55024