Audio
The system delivers analog stereo audio (Line Out), 8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio)
Approvals / Compliance
Standards
DVI-D Interface – digital only the system supports resolutions to a maximum of 1920 x 1200 @ 60Hz
Hardware compatibility: All computers with DVI-D, USB and audio – requirement dependent.
Cable Guidelines
Recommended cables are CAT7 shielded foiled twisted pairs:
- Daetwyler 7702 Flexible patch cable
- Daetwyler 7120 Bulk cable
CAT5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. Distances are achieved using single lengths of trunk/bulk cable.
For each break/patch connection reduce distance by 5m. Preferably patch cables should be of type CAT7a and less than 2m. Patch cables over 2m must be CAT7a. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system. CAT5e is not recommended for use with this system.
Scheme |
Resolution |
Cable |
Distance |
WUXGA |
1920×1200 |
CAT7 |
50 metres |
WUXGA |
1920×1200 |
CAT6a |
50 metres |
UXGA |
1600×1200 |
CAT5e |
50 metres |
WUXGA |
1920×1200 |
CAT7 |
40 metres |