Feature Bullets
- Convert 2x mSATA SSD to a standard internal 2.5″ 7mm SATA drive. It supports H/W RAID 0, RAID 1, SPAN (Big Drive) and PM (2Drives) Modes. Note: SATA Host is required to be Port Multiplier capable for PM Mode.
- Supports 6Gbps, 3Gbps mSATA SSD
- Open frame aluminum housing dessign providing excellent heat dissipation for mSATA SSD
- No driver installation required. Native support in Windows, Mac and Linux.
- CE, FCC, and Fully RoHS compliant. High quality product. Made in Taiwan.
Product Description
The Ableconn ISAT-178R turns two mSATA SSDs into a 2.5-inch SATA III SSD drive with RAID to increase performance and redundancy. The drive metal frame and mounting holes enable you to install it like a 2.5″ internal hard drive.
Specification
- Connector:
- 1 x SATA Data & Power (7+15 pins) Receptale
- 2 x mSATA latch type slots
- Chipset: J-Micron JMS562
- Data transfer rate:
- Up to 6 Gbps (SATA III)
- Jumper Selection:
- 1 x jumper for RAID Mode setting
- Software:
- OS independent; No driver installation is required on Windows, Mac, and Linux.
- Provides Windows and Mac GUI to configure RAID modes and monitor RAID status.
- 6Gbps SATA III H/W RAID Controller
- Convert 2x Full Size SATA III (6Gbps) mSATA SSD to a standard 2.5″ 7mm SATA drive
- Supports SATA I, SATA II, SATA III Host port.
- Support SATA hot plug and booting.
- The mSATA SSD can be the primary bootable device containing the OS and application.
- Supports H/W RAID 0, RAID 1, SPAN (Big Drive) and PM (2Drives) Modes.Note:SATA Host is required to be Port Multiplier capable for PM Mode.
- Latch type mSATA connector on board, no need the screw to retain mSATA SSD
- Hardware Jumper and Windows & Mac software GUI configure RAID modes
- Includes 7mm height 2.5-inch drive metal frame with 8 mounting holes and 4 HDD screws
- Dimensions (LxWxH): 4 x 2.8 x 0.2 in / 100 x 70 x 7 mm
- Fully RoHS compliant.
- Made in Taiwan
Package Contents
- Ableconn ISAT-178R 2.5-inch SATA Adapter for Dual mSATA SSDs with RAID
- 4x drive mounting screws
