Feature Bullets
- Convert any 2.5″ SATA drive into 44-pin IDE interface just like a standard 2.5″ IDE drive. Ideal for computers or embedded systems that are not equipped with SATA controllers.
- Support 5V SATA III, SATA II and SATA I Drive and SSD
- Complete hardware solution; no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI storage devices
- Mini vertical board with size only 2.7″ (L) x 0.6″ (W) and mount directly to the back of SATA drive.
- Fully RoHS compliant. Made in Taiwan.
Product Description
The Ableconn IDE44-SAT allows you to install a SATA HDD or SSD to the motherboard with IDE/ATA connector. It’s the easiest and cost effective solution to replace existing IDE drives with newer cost-effective SATA drives to your systems that are only equipped with IDE interfaces.
Specification
- Connector:
- 1 x IDE (44-pin, PATA) Male (to be connected with a standard 44-pin IDE cable)
- 1 x SATA Data & Power (7+15 pins) (direct attach to SATA drive)
- Chipset: Marvell 88SA8052
- Data transfer rate:
- Up to 150 MBps
- Jumper Selection:
- 1 x jumper for selection of Master/Slave/Cable Select mode
- Software:
- OS independent; No driver installation required
- Support Windows, Macs, and Linux
- Support 5V SATA III, SATA II and SATA I Drive and SSD
- SATA II 3Gbps controller Mini vertical Adapter Board
- 44Pin 2.0mm IDE male connector for 5V DC and ATA signals
- PCBA and SATA drive powered by Pin 41& 42 of IDE connector 5V input
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Compliant with Serial ATA 2.6
- Bootable
- ATA/ATAPI PIO mode data transfer
- ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
- Tag Command Queuing (Max 32 entries)
- ATA/ATAPI-7 Streaming feature set
- Fully RoHS Compliant
- Made in Taiwan
Package Contents
- Ableconn IDE44-SAT IDE 44-Pin to SATA Drive Mini Adapter
