Featured Products
Finisar / FTLX1471D3BCL
Finisar’s FTLX1471D3BCL 10Gb/s SFP+ optical transceivers are intended for use in 10-Gigabit Ethernet connects up to 10km over Single Mode fiber. They are consistent with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fiber Channel 1200-SM-LL-L. Computerized diagnostics capacities are accessible by means of a 2-wire sequential interface, as indicated in SFF-8472. The FTLX1471D3BCL is a “restricting module”, i.e., it utilizes a restricting beneficiary. Host board creators utilizing an EDC PHY IC ought to follow the IC producer’s suggested settings for interoperating the host-board EDC PHY with a restricting collector SFP+ module. The handset is RoHS agreeable and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.
Finisar / FTCD1323E1PCL
FTCD1323E1PCL LR8 QSFP-DD handset modules are intended for use in 400 Gigabit Ethernet joins on up to 10km of single mode fiber. They are agreeable with the QSFP-DD MSA, QSFP28 MSA, IEEE P802.3bs and parts of IEEE P802.3bm. Advanced symptomatic capacities are accessible through the I2C interface, as indicated by the MSA and Application Note AN-20xx. The optical handset is RoHS consistent as portrayed in Application Note AN-2038.
Finisar / FTLC9558REUM
FTLC9558REUM 100G QSFP28 braid transceiver modules are intended for use in 100 Gigabit Ethernet connects over multimode fiber and can persevere through fluid inundation climate. They are consistent with the QSFP28 MSA and IEEE 802.3bm 100GBASESR4 and CAUI-4. Computerized diagnostics capacities are accessible by means of the I2C interface, as indicated by the QSFP28 MSA and Finisar Application Note AN-2141. The optical transceiver is RoHS agreeable as portrayed in Application Note AN-2038.
FCBN510QE2Cxx
The Quadwire® Breakout AOC is a 4×10 Gb/s equal dynamic optical link for capacity, information, and elite processing interconnectivity. The Quadwire® AOC sends four separate floods of 10 Gb/s information over lace links in a highlight multipoint design. The link contains a QSFP+ module toward one side and four separate SFP+ modules at different closures.
In view of II-VI’s demonstrated VCSEL exhibit innovation and planned with MSA-consistent QSFP+ and SFP+ high-thickness connectors, these links are minimized, lightweight, and low force. With comes to up to 30 meters, the Quadwire® Breakout dynamic optical link is undeniably appropriate for high-thickness 10G Ethernet, InfiniBand QDR, and other datacom and superior registering applications.
FTLF8519P3BNL
FTLF8519P3BNL Small Form Factor Pluggable (SFP) optical transceivers are viable with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are at the same time viable with Gigabit Ethernet as indicated in IEEE Std 802.3 and Fiber Channel FC-PI-2 Rev. 5.0. Computerized diagnostics capacities are accessible by means of the 2-wire sequential transport indicated in the SFP MSA. The optical transceiver is RoHS consistent as portrayed in Application Note AN-2038.
FTLX8574D3BCL
FTLX8574D3BCL 10Gb/s SFP+ optical transceivers are intended for use in 10-Gigabit Ethernet connects over multimode fiber. They are consistent with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fiber Channel 1200-Mx-SN-I. Advanced diagnostics capacities are accessible by means of a 2-wire sequential interface, as indicated in SFF-8472. The FTLX8574D3BCL is a “restricting module”, i.e., it utilizes a restricting recipient. Host board architects utilizing an EDC PHY IC ought to follow the IC maker’s suggested settings for interoperating the host-board EDC PHY with a restricting beneficiary SFP+ module. The optical transceiver is RoHS consistent as portrayed in Application Note AN-2038.
Finisar FTLX8574D3BCV
FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are intended for use in 1-Gigabit and 10-Gigabit Ethernet connects over multimode fiber. They are consistent with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Advanced diagnostics capacities are accessible through a 2-wire sequential interface, as determined in SFF-8472. The FTLX8574D3BCV is a “restricting module”, i.e., it utilizes a restricting recipient. Host board planners utilizing an EDC PHY IC ought to follow the IC producer’s suggested settings for interoperability with a SFP+ restricting module. This item is for applications explicitly intended for 10G SFP+ ports and 1G/10GSFP+ ports and not local 1G SFP ports. The optical transceiver is RoHS consistent as depicted in Application Note AN-2038.
FCLF852xP2BTL
FCLF8522P2BTL, FCLF8520P2BTL & FCLF8521P2BTL 1000BASE-T Copper Small Form Pluggable (SFP) transceivers depend on the SFP Multi Source Agreement (MSA). They are viable with the Gigabit Ethernet and 1000BASE-T guidelines as determined in IEEE Std 802.3. The optical transceiver is RoHS agreeable as portrayed in Application Note AN-2038. The 1000BASE-T actual layer IC (PHY) can be gotten to by means of I2C, permitting admittance to all PHY settings and highlights.