Zenty IP210 AV Over IP- (Best Price in India)

IP210 AV Over IP System (w/ PoE) Encoder

Highlights

  • Extend your HDMI signal up to 400ft., and use these encoders/decoders in a Point-to-Point connection, Point-to-Many, and Many-to-Many Broadcasting configuration
  • This extender encodes and decodes HDMI signals using H.264 compression and transmits the signal via direct ethernet for a point-point connection, or via LAN for a point-many or many-many connection
  • If you have multiple transmitters connected to different HDMI sources, you can switch between those sources from the Receiver side with front panel buttons, IR Remote or PC software. These extenders can be connected to a network switch that supports IGMP
  • Just enter your multicast group IP address and play video stream using VLC player
  • The following resolutions are supported: 1080p/1080i@60Hz, 720p/720i@60Hz, 576p/576i@50Hz, 480p/480i@60H
  • Contact us on team@bvmindia.in and Call: ‪+91-8800738089‬‬/‪‪+91-9205161813
Category:

Zenty ZT-IP210E AV Over IP Encoder (PoE)

Image

Image

Image

The ZT-IP210E is an HDMI-over-IP encoder that works with the ZT-IP210D decoder to distribute Full HD video across a standard Ethernet network using H.264 compression. It supports point-to-point, point-to-many, and many-to-many AV distribution over LAN infrastructure. (Zenty)

Key Specifications

FeatureDetails
ModelZT-IP210E (Encoder)
ResolutionUp to 1080p @ 60 Hz
CompressionH.264
Transmission DistanceUp to 400 ft (122 m)
Network TypeDirect Cat5e/Cat6 or LAN
ModesPoint-to-Point, Point-to-Many, Many-to-Many
Multicast SupportYes
ControlFront panel, IR remote, PC software
Network Switch RequirementIGMP-supported switches recommended
StreamingVLC multicast playback supported

(Zenty)

Front & Rear Panel Overview

Front Panel

  • RS-232 control port
  • IR extension port
  • Channel display
  • Channel selection buttons
  • Reset button

Rear Panel

  • HDMI input/output interface
  • RJ45 Ethernet port
  • IR transmitter/receiver port
  • DC power input

These interfaces allow centralized source switching and integration with control systems.

Supported Applications

  • Digital signage
  • Corporate AV distribution
  • Education campuses
  • Churches and worship facilities
  • Sports bars
  • Multi-room home theater systems

Control System Compatibility

Drivers are available for:

  • Control4
  • Crestron
  • Q-SYS
  • RTI
  • URC

Typical AV Over IP Topology

HDMI Source
     │
ZT-IP210E Encoder
     │
 Gigabit Network Switch
 ┌───┼────┬────┐
 │   │    │    │
ZT-IP210D Decoders
 │   │    │    │
Display Display Display Display

Advantages

✔ Uses existing network infrastructure
✔ Supports multicast video distribution
✔ Flexible source-to-display routing
✔ VLC-compatible network streaming
✔ Scalable architecture for multiple displays

Limitations

✖ Maximum resolution limited to 1080p
✖ H.264 compression introduces some latency
✖ Requires network configuration for large deployments
✖ Not suitable for ultra-low-latency 4K applications

For modern 4K60 HDR deployments, Zenty’s newer IP300 and IP400 AV-over-IP platforms offer significantly higher performance, video-wall capability, USB/KVM support, and lower latency. (zenty.com)

Scroll to Top