The E-TBT-MC05 is an Attachment Unit Interface (AUI) transceiver that provides a method for connecting a workstation, or any other device with an AUI port, to twisted pair cabling in a 10Base-T network. Devices with AUI ports could include: servers, hubs, bridges and routers. The E-TBT-MC05 transceiver allows twisted pair, UTP or STP, to be connected to these AUI ports.
Features
- Provides a complete interface of the AUI to Ethernet UTP cable
- Supports data transfer rate of 10 Mbps
- CSMA/CD access mechanism
- Capable of driving the UTP cable segment up to 100 m (328 ft.) without the use of a repeater
- Selectable Link test and SQE test functions
- AUI locking post design allows the E-TBT-MC05 to directly attach to a host’s AUI connector
- Can be used with or without an AUI cable
- LED indicators for network monitoring and diagnosing
- The RJ-45 port will automatically detect and reverse the polarity on the receive pair, if needed
E-TBT-MC05 Tech Specs
Standards
- IEEE 802.3
- 10Base-T
Data Rate
- 10 Mbps
Switch
- SW1: SQE Test: UP is enabled
- SW2: Link Test: UP is enabled
- SW3: Half or Full-Duplex: UP is for Half, Down is for Full
Status LEDs
- COL: Blinks when detecting collisions
- STAT: Solid Green: UTP Link established; Blinks Green: No UTP Link; 4-Blink Pattern: Polarity reversal detected on UTP cable
- TX: Blinks when transmitting data on the RJ-45
- RX: Blinks when receiving data on the RJ-45
Dimensions
- Width: 3.1” [79 mm]
- Depth: 0.8” [20 mm]
- Height: 1.7” [43 mm]
Power Consumption
- Not to exceed 75mA@12 VDC
Power Supply
- No external power required
Power Input
- 10.2 to 15.75 VDC; 250mA@12 VDC
Environment
- Operating: 0°C to 50°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 1 lb. [0.45 kg]
MTBF
- 125,126 hours (Bellcore)
Certifications
- FCC & CISPR Class A, CE Mark
