Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with Deadbolt Banana plugs. Using self-crimping teeth these plugs provide a simple, secure, and low profile connection without requiring soldering or screws.
Easy to install:
- Unscrew the cap off the Deadbolt Banana Plug.
- Feed the bare conductor of the speaker wire through the center hole of the banana plug. (strip wire about 1/2″)
- Bend the wires of the speaker wire down around the teeth.
- Replace the cap to secure the speaker wire.
- Your Deadbolt Banana Plug is ready for connection.
Premium Materials
- 24k Gold Plating on Connector and Crimping Teeth
- Pure, High Density Copper Connector
- Heavy Duty Brass (black) Casing
Straight vs Right-Angle
Both options are great depending on your setup and how close to the wall you need your speakers to be.
Specifications
- 4mm Tip
- 24k Gold Plating on Connector and Crimping Teeth
- Pure, High Density Copper Connector
- Heavy Duty Brass (black) Casing
- Maximum accepted AWG: 8 AWG (10 AWG suggested)
- Maximum Jacket AWG: 2 AWG~ (1/4″)
- Will need to strip about 1/2″ of the jacket off the end of your speaker wire to terminate